PLA-GF
The glass fiber reinforced pla filament is developed on the basis of PLA is added with 16% glass fiber, which greatly enhances the rigidity and impact resistance of ordinary PLA. The PLA-GF’s bending modulus is as high as 4400MPa, which is highly rigid and not easy to distort;
- * Description:
-
Description
The glass fiber reinforced pla filament has high impact resistance and good printability; Suitable for mechanical parts prototypes with requirements for rigidity and impact resistance; Wear-resistant performance makes PLA-GF suitable for printing gears and can be used as temporary functional parts.
Sellingpoint
High rigidity
High impact resistance
High wear resistance
Excellent printability
Review
- * Application
- * Print model
-
1. PLA-GF line has strong rigidity and is not easy to bend. In the feeding pipeline, excessive bending of filament should be avoided as far as possible 2. PLA-GF is very easy to grind the nozzle and extruder gear. It is recommended to use hardened steel nozzle or ruby nozzle. If conditions permit, hardened steel extruder gear can be selected. If the printing time is long and the plug occurs, the throat and nozzle need to be replaced 3. The blowing fan can be properly turned off to improve the model strength
-
ePLA-GF Filament MSDS -
TDS -
REACH -
RoHS
| Density(g/cm3) | 1.31 |
| Melt Flow Index | 6.36（190℃/2.16kg） |
| Heat Distortion Temp(℃,0.45MPa) | 56 |
| Extruder Temperature(℃) | 190-230℃ |
| Bed temperature(℃) | 45-60℃ |
| Fan Speed(％) | 100% |
| Printing Speed(mm/S) | ＜150mm/s |
| Heated Bed | Need |
| Printing Suggestions | Use hardened steel nozzle |
