PETG-ESD
PETG-ESD line resistivity as low as 10^7Ω/m, the surface resistivity of the printed model is as low as 10^9Ω/m, good resistance to static electricity, can effectively reduce dust adhesion and prevent electrostatic breakdown damage to electronic components. Antistatic PETG is simple to use, you can use ordinary PETG material parameters for direct printing, you can get good printing results, with a lower resistivity while still maintaining the excellent characteristics of PETG only toughness.
- * Description:
-
Description
PETG-ESD line resistivity as low as 10^7Ω/m, the surface resistivity of the printed model is as low as 10^9Ω/m, good resistance to static electricity, can effectively reduce dust adhesion and prevent electrostatic breakdown damage to electronic components. Antistatic PETG is simple to use, you can use ordinary PETG material parameters for direct printing, you can get good printing results, with a lower resistivity while still maintaining the excellent characteristics of PETG only toughness.
Features
Antistatic And Dust-proof
Highly Abrasion ResistantExcellent Printability
Odourless Printing
- * Product introduction video
-
- * Application
- * Print model
-
-
Parameters forbrBambu Lab & Creality -
MSDS -
TDS -
REACH -
ROHS
| Density(g/cm3) | 0.97 |
| Melt Flow Index | 3.3(220℃/2.16kg) |
| Heat Distortion Temp(℃,0.45MPa) | 96 |
| Tensile Strength(MPa) (XY) | 38 |
| Tensile Strength(MPa)(Z) | 22 |
| Elongation at Break(%)(XY) | 4.8 |
| Elongation at Break(%)(Z) | 3.1 |
| Flexural Strength(MPa)(XY) | 63 |
| Flexural Strength(MPa)(Z) | 35.9 |
| Flexural Modulus(MPa)(XY) | 2263 |
| Flexural Modulus(MPa)(Z) | 1677 |
| IZOD Impact Strength(kJ/㎡)(XY) | 19.29 |
| IZOD Impact Strength(kJ/㎡)(Z) | 2.1 |
| Extruder Temperature(℃) | 250-280℃ |
| Bed temperature(℃) | 70-90℃ |
| Fan Speed(％) | 10-40% |
| Printing Speed(mm/S) | ＜300mm/s |
| Heated Bed | Need |
| Printing Suggestions | Drying at 70 ℃ for more than 8H |
| Need to Dry | √ |
