ePLA-Gloss(Customizable)
ePLA-Gloss is a cost-effective PLA material with a glossy surface effect, and the surface is smooth without layering. Compared with ABS, ePLA-Gloss does not need to close the cavity, has low shrinkage, no warping, no cracking, and can print large-scale models; compared with other materials, ePLA-Gloss is easier to peel off from the surface of the model, and the surface of the contact surface is smooth and flat.(This product has been discontinued and is out of stock. If you have large-volume customization needs, please contact us by leaving a message.)
- * Description:
-
Description
When printing with ePLA-Gloss, there will be no irritating smell, which is safe and environmentally friendly; The spool is based on PETG, ABS, PLA and other production wastes and industrial wastes, which are recycled and injected;And the outer box is made of recyclable cartons. eSUN's concept of environmental protection makes 3D printing more sustainable.The ePLA-Gloss are not easy to be brittle, and the printing is smooth for a long time without clogging. This pla filament can be used for early concept models and rapid prototyping.
Sellingpoint
Green and environment-friendly
High cost - effective
High speed printing
The support is easy to remove
View more about PLA Filament
Easy to print
Hard to break
Shinny appearance
- * Product introduction video
-
- * Application
- * Print model
-
-
MSDS -
TDS -
ROHS -
REACH
| Density(g/cm3) | 1.26 |
| Melt Flow Index | 3.3(190℃/2.16kg) |
| Heat Distortion Temp(℃,0.45MPa) | 56.7 |
| Extruder Temperature(℃) | 190-230℃ |
| Bed temperature(℃) | 45-60℃ |
| Fan Speed(％) | 100% |
| Printing Speed(mm/S) | 40-100 |
| Heated Bed | Need |
